From 2c3b9f820f06a40f9952efd1bf6358caba146c2d Mon Sep 17 00:00:00 2001 From: Max Lv Date: Mon, 18 Jul 2016 11:04:24 +0800 Subject: [PATCH] Fix #769 --- src/main/jni/Android.mk | 3 +- src/main/jni/include/pdnsd/config.h | 437 ++++++++++++++++++++++++++++ 2 files changed, 439 insertions(+), 1 deletion(-) create mode 100644 src/main/jni/include/pdnsd/config.h diff --git a/src/main/jni/Android.mk b/src/main/jni/Android.mk index 46cca351..247a43c3 100755 --- a/src/main/jni/Android.mk +++ b/src/main/jni/Android.mk @@ -371,7 +371,8 @@ PDNSD_SOURCES := $(wildcard $(LOCAL_PATH)/pdnsd/src/*.c) LOCAL_MODULE := pdnsd LOCAL_SRC_FILES := $(PDNSD_SOURCES:$(LOCAL_PATH)/%=%) -LOCAL_CFLAGS := -DANDROID -Wall -O2 -I$(LOCAL_PATH)/pdnsd +LOCAL_CFLAGS := -DANDROID -Wall -O2 -I$(LOCAL_PATH)/pdnsd \ + -I$(LOCAL_PATH)/include/pdnsd include $(BUILD_EXECUTABLE) diff --git a/src/main/jni/include/pdnsd/config.h b/src/main/jni/include/pdnsd/config.h new file mode 100644 index 00000000..3740beae --- /dev/null +++ b/src/main/jni/include/pdnsd/config.h @@ -0,0 +1,437 @@ +/* config.h. Generated from config.h.in by configure. */ +/* config.h.in. Generated from configure.in by autoheader. */ +#ifndef _CONFIG_H_ +#define _CONFIG_H_ + +/* ONLY EDIT acconfig.h, NEVER config.h or config.h.in! + * config.h MAY BE OVERWRITTEN BY make, config.h.in by autoheader! */ + +/* Define your Target here. Currently defined are TARGET_LINUX (any + * architecture), TARGET_BSD (experimental; tested on FreeBSD, hopefully + * works for other BSD variants) and TARGET_CYGWIN. */ +#define TARGET TARGET_LINUX + +/* change the #undef to #define if you do not want to compile with special + * ISDN support for Linux. Note that the ISDN support will not compile ok on + * unpatched kernerls earlier than 2.2.12 (if you did apply newer isdn patches, + * it may work fine). This is not on by default because it will cause compile + * problems on some systems */ +/* #undef ISDN_SUPPORT */ + +/* The following regulates the IP Protocol support. Supported types are IPv4 + * and IPv6 (aka IPng). You may enable either or both of these protocols. + * Enabling in this context means that support for the respective protocol + * will be in the binary. When running the binary, one of the protocols may + * be activated via command line switches. Note that activating both IPv4 and + * IPv6 is pointless (and will not work because two UDP and two TCP threads + * will be started that concur for ports). Because of that, it is not allowed. + * When pdnsd runs with IPv6 activated it should be able to service queries + * from IPv6 as well as from IPv4 hosts, provided that you host is configured + * properly. + * For each of the protocols there are two options: ENABLE_IPV4 and ENABLE_IPV6 + * control whether support for the respective protocol is available in the + * binary. DEFAULT_IPV4 selects which protocol is enabled on pdnsd + * startup by default. 1 means IPv4, while 0 means IPv6. If support for + * a protocol was included in the executable, you can specify command line + * parameters to activate or deactivate that protocol (the options are -4 and + * -6), but it makes more sense to use the run_ipv4=on/off option in the + * configuration file. + * Make your choice. Note that IPv6 support is experimental in pdnsd. + * In normal operation, you will currently only need IPv4. */ +#define ENABLE_IPV4 1 +#define DEFAULT_IPV4 1 +#undef ENABLE_IPV6 + +/* In all pdnsd versions before 1.0.6, DNS queries were always done over + * TCP. Now, you have the choice. You can control that behaviour using + * the -m command line switch, and you can give a preset here. There + * are 3 different modes: + * UDP_ONLY: This is undoubtedly the fastest query method, because + * no TCP negotiation needs to be done. + * TCP_ONLY: This is slower than uo, but generally more secure + * against DNS spoofing. Note that some name servers on the + * internet do not support TCP queries, notably dnscache. + * TCP_UDP: TCP, then UDP. If the TCP query fails with a "connection refused"- + * error or times out, the query is retried using UDP. + * UDP_TCP: UDP, then TCP. If the UDP reply is truncated (i.e. the tc flag is set), + * the query is retried using TCP. */ +#define M_PRESET TCP_ONLY + +/* In addition to choosing the presets, you may also completely disable + * one of the protocols (TCP for preset UDP_ONLY and UDP for preset TCP_ONLY). + * This saves some executable space. */ +/* #undef NO_UDP_QUERIES */ +/* #undef NO_TCP_QUERIES */ + +/* With the following option, you can disable the TCP server functionality + * of pdnsd. Nearly no program does TCP queries, so you probably can do + * this safely and save some executable space and one thread. + * You also can turn off the TCP server at runtime with the --notcp option. */ +/* #undef NO_TCP_SERVER */ + +/* By undefining the following, you can disable the UDP source address + * discovery code. This is not recommended, but you may need it when + * running into compilation problems. */ +#define SRC_ADDR_DISC 1 + +/* NO_POLL specifies not to use poll(2), but select(2) instead. If you are + * unsure about what this means, just leave this as it is.*/ +/* #undef NO_POLL */ + +/* Define this for "hard" RFC 2181 compliance: this RFC states that + * implementations should discard answers whose RR sets have multiple + * different time stamps. While correct answers are generated, incorrect + * ones are normally tolerated and corrected. Full RFC compliance is + * however only achieved by deactivating this behaviour and thus being + * intolerant. */ +/* #undef RFC2181_ME_HARDER */ + +/* Define this to the device you want to use for getting random numbers. + * Leave this undefined if you wand to use the standard C library random + * function, which basically should be sufficient. + * Linux and FreeBSD have two random number devices: /dev/random and + * /dev/urandom. /dev/urandom might be less secure in some cases, but + * should still be more than sufficient. The use of /dev/random is + * discouraged, as reading from this device blocks when new random bits + * need to be gathered. */ +/* #undef RANDOM_DEVICE */ +#define R_DEFAULT 1 +/* #undef R_RANDOM */ +/* #undef R_ARC4RANDOM */ +/*#define RANDOM_DEVICE "/dev/urandom"*/ + +/* Designate which database manager to use for cacheing. + * default: native; others: gdbm */ +#define CACHE_DBM DBM_NATIVE + +#define CONFDIR "/data/data/com.github.shadowsocks" + +#define CACHEDIR "/data/data/com.github.shadowsocks" + +#define TEMPDIR "/data/data/com.github.shadowsocks/cache"; + +/* This is for various debugging facilities that produce debug output and + * double-check some values. You can enable debug messages with the -g option. + * Normally, you can switch this off safely by setting the number after DEBUG + * to 0. This will increase speed (although only marginally), save space + * in the executable (only about 12kB) and some stack space per thread + * (which may be significant if you have many threads running simultaneously). + * However, it may be an aid when debugging config files. + * The only defined debug levels by now are in the range 0 - 9. + * Define this to 9 if you want hex dumps of all the queries and replies pdnsd + * receives (you must also call pdnsd with -v9 to actually see the hex dumps). + * When in doubt, leave it defined to 1. */ +#define DEBUG 1 + +/* This defines the default verbosity of informational messages you will get. + This has nothing to to with the debug option (-g), but may be set with -v + option. 0 is for normal operation, up to 3 for debugging. + Unlike the debug messages, these messages will also be written to the syslog.*/ +#define VERBOSITY 0 + +/* Redefine this if you want another hash size. + * The number of hash buckets is computed as power of two (1< and it should be used (not on Ultrix). + */ +#define HAVE_ALLOCA_H 1 + +/* Define to 1 if you have the `asprintf' function. */ +#define HAVE_ASPRINTF 1 + +/* Define to 1 if you don't have `vprintf' but do have `_doprnt.' */ +/* #undef HAVE_DOPRNT */ + +/* Define to 1 if you have the header file. */ +#define HAVE_FCNTL_H 1 + +/* Define to 1 if you have the `getline' function. */ +#if defined(__aarch64__) || defined(__x86_64__) +#define HAVE_GETLINE 1 +#endif + +/* Define to 1 if you have the `getpwnam_r' function. */ +//#define HAVE_GETPWNAM_R 1 + +/* Define to 1 if you have the `gettimeofday' function. */ +#define HAVE_GETTIMEOFDAY 1 + +/* Define to 1 if you have the `inet_ntop' function. */ +#define HAVE_INET_NTOP 1 + +/* Define to 1 if you have the `inet_pton' function. */ +#define HAVE_INET_PTON 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_INTTYPES_H 1 + +/* Define to 1 if you have the `pthread' library (-lpthread). */ +#define HAVE_LIBPTHREAD 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_MALLOC_H 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_MEMORY_H 1 + +/* Define to 1 if you have the `mempcpy' function. */ +//#define HAVE_MEMPCPY 1 + +/* Define to 1 if you have the `mkfifo' function. */ +#define HAVE_MKFIFO 1 + +/* Define to 1 if you have the `nanosleep' function. */ +#define HAVE_NANOSLEEP 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_NETINET_IN_H 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_NET_IF_H 1 + +/* Define to 1 if you have the `poll' function. */ +#define HAVE_POLL 1 + +/* Define to 1 if you have the `select' function. */ +#define HAVE_SELECT 1 + +/* Define to 1 if you have the `snprintf' function. */ +#define HAVE_SNPRINTF 1 + +/* Define to 1 if you have the `socket' function. */ +#define HAVE_SOCKET 1 + +/* Define to 1 if the system has the type `socklen_t'. */ +#define HAVE_SOCKLEN_T 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_STDINT_H 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_STDLIB_H 1 + +/* Define to 1 if you have the `stpcpy' function. */ +#if defined(__aarch64__) || defined(__x86_64__) +#define HAVE_STPCPY 1 +#endif + +/* Define to 1 if you have the `stpncpy' function. */ +//#define HAVE_STPNCPY 1 + +/* Define to 1 if you have the `strdup' function. */ +#define HAVE_STRDUP 1 + +/* Define to 1 if you have the `strerror' function. */ +#define HAVE_STRERROR 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_STRINGS_H 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_STRING_H 1 + +/* Define to 1 if you have the `strlcpy' function. */ +/* #undef HAVE_STRLCPY */ + +/* Define to 1 if you have the `strndup' function. */ +#define HAVE_STRNDUP 1 + +/* Define to 1 if the system has the type `struct ifreq'. */ +#define HAVE_STRUCT_IFREQ 1 + +/* Define to 1 if the system has the type `struct in6_addr'. */ +#define HAVE_STRUCT_IN6_ADDR 1 + +/* Define to 1 if the system has the type `struct in_pktinfo'. */ +#define HAVE_STRUCT_IN_PKTINFO 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_SYSLOG_H 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_SYS_IOCTL_H 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_SYS_POLL_H 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_SYS_SOCKET_H 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_SYS_STAT_H 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_SYS_TIME_H 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_SYS_TYPES_H 1 + +/* Define to 1 if you have that is POSIX.1 compatible. */ +#define HAVE_SYS_WAIT_H 1 + +/* Define to 1 if you have the `uname' function. */ +#define HAVE_UNAME 1 + +/* Define to 1 if you have the header file. */ +#define HAVE_UNISTD_H 1 + +/* Define to 1 if you have the `vasprintf' function. */ +#define HAVE_VASPRINTF 1 + +/* Define to 1 if you have the `vprintf' function. */ +#define HAVE_VPRINTF 1 + +/* Define to 1 if you have the `vsnprintf' function. */ +#define HAVE_VSNPRINTF 1 + +/* Define to 1 if your C compiler doesn't accept -c and -o together. */ +/* #undef NO_MINUS_C_MINUS_O */ + +/* Define to the address where bug reports for this package should be sent. */ +#define PACKAGE_BUGREPORT "" + +/* Define to the full name of this package. */ +#define PACKAGE_NAME "" + +/* Define to the full name and version of this package. */ +#define PACKAGE_STRING "" + +/* Define to the one symbol short name of this package. */ +#define PACKAGE_TARNAME "" + +/* Define to the version of this package. */ +#define PACKAGE_VERSION "" + +/* Define as the return type of signal handlers (`int' or `void'). */ +#define RETSIGTYPE void + +/* If using the C implementation of alloca, define if you know the + direction of stack growth for your system; otherwise it will be + automatically deduced at runtime. + STACK_DIRECTION > 0 => grows toward higher addresses + STACK_DIRECTION < 0 => grows toward lower addresses + STACK_DIRECTION = 0 => direction of growth unknown */ +/* #undef STACK_DIRECTION */ + +/* Define to 1 if you have the ANSI C header files. */ +#define STDC_HEADERS 1 + +/* Define to 1 if you can safely include both and . */ +#define TIME_WITH_SYS_TIME 1 + +/* Define to 1 if your declares `struct tm'. */ +/* #undef TM_IN_SYS_TIME */ + +/* Enable extensions on AIX 3, Interix. */ +#ifndef _ALL_SOURCE +# define _ALL_SOURCE 1 +#endif +/* Enable GNU extensions on systems that have them. */ +#ifndef _GNU_SOURCE +# define _GNU_SOURCE 1 +#endif +/* Enable threading extensions on Solaris. */ +#ifndef _POSIX_PTHREAD_SEMANTICS +# define _POSIX_PTHREAD_SEMANTICS 1 +#endif +/* Enable extensions on HP NonStop. */ +#ifndef _TANDEM_SOURCE +# define _TANDEM_SOURCE 1 +#endif +/* Enable general extensions on Solaris. */ +#ifndef __EXTENSIONS__ +# define __EXTENSIONS__ 1 +#endif + + +/* Define to 1 if on MINIX. */ +/* #undef _MINIX */ + +/* Define to 2 if the system does not provide POSIX.1 features except with + this defined. */ +/* #undef _POSIX_1_SOURCE */ + +/* Define to 1 if you need to in order for `stat' and other things to work. */ +/* #undef _POSIX_SOURCE */ + +/* Define to empty if `const' does not conform to ANSI C. */ +/* #undef const */ + +/* Define to `int' if does not define. */ +/* #undef pid_t */ + +/* Define to `unsigned int' if does not define. */ +/* #undef size_t */