shadowsocks-rust has supported the 2022 edition for years while libev was
stuck on the 2017 AEAD construction, the largest functional gap between
the two implementations. This adds the three SIP022 methods:
2022-blake3-aes-128-gcm
2022-blake3-aes-256-gcm
2022-blake3-chacha20-poly1305
TCP uses BLAKE3 derive_key for session subkeys, standalone header chunks
carrying a type byte and timestamp, request padding, and a response header
echoing the request salt. Replay protection uses an exact-match salt pool
with 60s retention rather than the bloom filter, which SIP022 forbids
because false positives are unacceptable there.
UDP is session-based: an AES-ECB separate header for the AES methods and a
merged XChaCha20-Poly1305 construction for ChaCha, with a per-session
sliding window replay filter. Servers must route by client session ID,
which is only known after decryption, so the crypto layer owns the
server-side session table and hands the session back to udprelay for the
reply path.
The 2022 code lives in aead2022.c and aead2022_udp.c so aead.c keeps its
current size, with aead_internal.h carrying what they share. BLAKE3 is
vendored (portable backend only) as its own build target.
Keys are base64 pre-shared keys of exactly the cipher's key size; per
SIP022 a password is never stretched into a key.
Verified interoperable in both directions against shadowsocks-rust 1.24.0
for all three ciphers over TCP and UDP, including an 8MB transfer checked
by digest, plus unit tests for header framing, partial delivery, tamper
detection, and UDP replay rejection.
* Modernize build: switch to CMake, add unit tests, fix man pages
Remove autotools (configure.ac, Makefile.am, m4/, autogen.sh) and make
CMake the sole build system. Enhance CMake with proper Find modules for
MbedTLS, libsodium, PCRE, and c-ares with version/feature detection.
Add support for connmarktos, nftables, stack protector, and MinGW.
Add 10 unit test suites (CTest) covering base64, buffer, cache, crypto,
jconf, json, netutils, ppbloom, rule, and utils modules. Add a Python
stress test measuring bandwidth per cipher with memory leak detection.
Fix man page typos ("Resovle" -> "Resolve"), document missing TCP buffer
options, fix ss-manager duplicate --executable entry, add example section
to ss-tunnel, and document --workdir and --nftables-sets options.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* Migrate from PCRE to PCRE2
Replace legacy PCRE (libpcre3) with PCRE2 (libpcre2-8). PCRE1 has been
end-of-life since 2021.
- src/rule.h: use pcre2_code and pcre2_match_data types
- src/rule.c: pcre_compile -> pcre2_compile, pcre_exec -> pcre2_match,
pcre_free -> pcre2_code_free, with proper error message retrieval
- cmake/FindPCRE.cmake -> cmake/FindPCRE2.cmake: find libpcre2-8 via
pkg-config, pcre2-config, or manual search
- Update all CMakeLists.txt, config.h.cmake, configure.cmake, README.md
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* Update Dockerfiles: use CMake build and pcre2-dev
The alpine Dockerfile still used autotools (autogen.sh/configure) which
were removed. Switch to cmake build and replace pcre-dev with pcre2-dev.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* Fix Docker build: disable tests and remove git dep
The tests/ directory is excluded by .dockerignore, so pass
-DBUILD_TESTING=OFF to cmake. Submodules are already checked out
by actions/checkout, no need for git inside the container.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* Fix Docker build: disable static libs (not available in alpine)
Alpine's mbedtls-dev only provides shared libraries. Disable static
build since Docker only needs shared binaries.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* Rewrite GitHub Actions: build and test directly on runner
Replace Docker-based CI with direct cmake build on ubuntu-latest and
macos-latest. Install dependencies via apt/brew, build with cmake,
run unit tests with ctest.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* Fix CI: use mbedtls@3 on macOS, disable static build
- macOS: brew's mbedtls is now v4 (incompatible), use mbedtls@3
- Disable static build since CI runners lack static lib packages
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* Fix test build on Linux: add stdint.h and link libm
- test_ppbloom.c: add missing #include <stdint.h> for uint8_t
- test_json: link against libm for pow() used in json.c
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* Fix test_ppbloom link: add libm for bloom's log()
On Linux, libbloom uses log() which requires explicit -lm linkage.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* Fix Linux build: link libm for test_buffer and test_crypto, fix warnings
Both test_buffer and test_crypto link libbloom.so which uses log() from
libm. Also fix unused variable warnings in test_json.c that would fail
with -Werror.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* Fix Linux build: link libm for test_jconf (json.c uses pow)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* CI: add unit test and stress test steps to GitHub Actions
Split the Test step into separate "Unit tests" (ctest) and "Stress test"
(stress_test.py with 10MB transfer across all AEAD ciphers) steps for
better visibility.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* ss-libev: Introduce mode parameter for start_plugin
Since obfsproxy handles client and server in different ways, no matter
standalone or manged mode, so introduce the mode for start_plugin() to
support obfsproxy.
With more comments added to plugin.h for later developers.
Signed-off-by: Adam Anonymous <anonymous_temp_mail@yahoo.co.jp>
* ss-libev: Move SS protocol plugin initialization code to start_ss_plugin
Move SS protocol plugin initialization to start_ss_plugin() function, as
the support for obfsproxy will not use that environment.
Also, remove the use of get_current_dir_name() which is a glibc
extension, such macro hack will just make code less readable.
Not to mention it already screw up code folding of vim.
Signed-off-by: Adam Anonymous <anonymous_temp_mail@yahoo.co.jp>
* ss-libev: Introduce obfsproxy standalone mode support as plugin
Now shadowsocks-libev supports to use obfsproxy as plugin.
Currently we only support to use standalone(proxy) mode of obfsproxy, as
managed mode needs to use SOCKS5 as upstream forward, while ss-libev
doesn't support it yet.
And the output from plugin is just trashed for now.
Support to pipe them into stdout/stderr will be added later.
Signed-off-by: Adam Anonymous <anonymous_temp_mail@yahoo.co.jp>
* ss-libev: doc: Fix wrong cmdline parameter for plugin options
Command line option for plugin options is "--plugin-opts", not the json
option "--plugin_opts"
Fix it.
Signed-off-by: Adam Anonymous <anonymous_temp_mail@yahoo.co.jp>
Add experimental HTTP/TLS obfuscating as an **optional extension** of shadowsocks protocol.
More discussions can be found here: https://github.com/shadowsocks/shadowsocks-org/issues/26
As this feature is still a SIP (Shadowsocks Improvement Proposal), it's very unstable and experimental. So,
1. Don't enable it unless you know what it is.
2. Be very careful when using it in production environment.
Max Lv
汪心禾
Simon Shi
Pang Linbin
hwchan
Yegor Ievlev
Boyuan Yang
anonymous-contributor
Syrone Wong
Max Lv